The whole story is on my OX-5 blog.
Tuesday, May 28, 2013
OX-5 Exhaust Manifold
The whole story is on my OX-5 blog.
Subscribe to:
Posts (Atom)
skip to main |
skip to sidebar
I've been working on making exhaust manifolds for the OX-5. I don't need them for a long time but John Gaertner needs a set for the Jenny project, so they moved to the front of a long line of tasks.
The whole story is on my OX-5 blog.
I finally have the first shell half successfully formed. It came out very well. Check it out in my latest OX-5 posting.
Progress on the restoration of a 1926 WACO NINE
The whole story is on my OX-5 blog.
NC1184 in Pennsylvania 1927
For Your Info
Postings to this are being entered as we do things or have time to write about things we've learned. You'll see the latest entry at the top of the page.
If you're new to this blog you might want to go back and read from the start. There is also a subject index to help you find postings on specific subject areas.
Last things, click on a picture to enlarge it, click the Play > on videos to watch them (they may take a few minutes to load on a slow connection).
If you're new to this blog you might want to go back and read from the start. There is also a subject index to help you find postings on specific subject areas.
Last things, click on a picture to enlarge it, click the Play > on videos to watch them (they may take a few minutes to load on a slow connection).
Subjects
- Ailerons (4)
- Band Saw (3)
- Brace Wires (22)
- Controls (11)
- Cowl (3)
- False Nose Ribs (10)
- Fittings (15)
- Fuselage (19)
- Gas Tank (1)
- General (9)
- History (4)
- Jenny Parts (1)
- Motor (3)
- Nailer (3)
- Paint Parts (2)
- Radiator (1)
- Soldered Cable Splice (3)
- Tail Surfaces (28)
- Tools (118)
- Varnish (1)
- Video (3)
- Wing Ribs (46)
- Wing Spar Routing (5)
- Wing Spars (24)
- Wing Stands (3)
- Wing Tip Bow (11)
- Wing Walk (8)
- Wings (62)
- Wire Ferrules (7)
